Acura 2010 RDX Bedienungsanleitung PDF herunterladen (Seite 179)

To Select a Station

You can use any of five methods to

find radio stations on the selected

band: tune, seek, scan, the preset

bars, and auto select.

TUNE － Use the TUNE/FOLDER

bar to tune the radio to a desired

frequency. Press the

side of the

bar to tune to a higher frequency,

and the

side of the bar to tune to

a lower frequency.

If you press and hold the

or

side of the bar, the frequency will

begin to change rapidly. It will stop

when you release it.

SEEK － The SEEK function

searches up and down from the

current frequency to find a station

with a strong signal. To activate it,

press the

or side of the

SEEK/SKIP bar, then release it.

SCAN － The SCAN function

samples all stations with strong

signals on the selected band. To

activate it, press the SCAN button,

then release it. You will see ‘‘SCAN’’

on the center display. When it finds a

strong signal, it will stop and play

that station for about 10 seconds.

If you do nothing, the system will

then scan for the next strong station

and play it for 10 seconds. When it

plays a station you want to listen to,

press the SCAN button again.

Preset － Each side of the bars

(1－6) can store one frequency on

AM and two frequencies on FM.

1. Select the desired band, AM or

FM. FM1 and FM2 let you store

two frequencies with each side of

the preset bar.

2. Use the TUNE, SEEK, or SCAN

function to tune the radio to a

desired station.

3. Pick the preset number (1－6), for

the station you want to store. Press

the left or right side of the bar, and

hold it until you hear a beep.

4. Repeat steps 1 through 3 to store a

total of six stations on AM and

twelve stations on FM.

CONTINUED

Playing the FM/AM Radio (Models without navigation system)

175

Features

09/07/07 15:02:04 10 ACURA RDX MMC North America Owner's M 50 31STK630 enu

2010 RDX

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 513 514

Kommentare zu diesen Handbüchern

Keine Kommentare