Acura 2010 RDX Bedienungsanleitung PDF herunterladen (Seite 466)

3. Connect one jumper cable to the

positive (＋) terminal on your

battery. Connect the other end to

the positive (＋) terminal on the

booster battery.

4. Connect the second jumper cable

to the negative (－) terminal on

the booster battery. Connect the

other end to the grounding point

as shown. Do not connect this

jumper cable to any other part of

the engine.

5. If the booster battery is in another

vehicle, have an assistant start that

vehicle and run it at a fast idle.

6. Start your vehicle. If the starter

motor still operates slowly, check

that the jumper cables have good

metal-to-metal contact.

7. Once your vehicle is running,

disconnect the negative cable from

your vehicle, then from the

booster battery. Disconnect the

positive cable from your vehicle,

then from the booster battery.

Keep the ends of the jumper cables

away from each other and any metal

on the vehicle until everything is

disconnected. Otherwise, you may

cause an electrical short.

Jump Starting

462

09/07/07 15:02:04 10 ACURA RDX MMC North America Owner's M 50 31STK630 enu

2010 RDX

1 2 ... 461 462 463 464 465 466 467 468 469 470 471 ... 513 514

Kommentare zu diesen Handbüchern

Keine Kommentare