Acura 2010 RDX Bedienungsanleitung PDF herunterladen (Seite 435)

Headlight Aiming

The headlights were properly aimed

when your vehicle was new. If you

regularly carry heavy items in the

cargo area or pull a trailer,

readjustment may be required.

Adjustments should be done by your

dealer or another qualified

technician.

Low Beam Headlight Bulb

Replacement

The low beam headlight bulbs are

high voltage discharge tube. High

voltage can remain in the circuit even

with the light switch off and the key

removed. Because of this, you should

not attempt to examine or change a

low beam headlight bulb yourself. If

a low beam headlight bulb fails, take

the vehicle to your dealer to have it

replaced.

Replacing a High Beam Headlight

Bulb

Your vehicle has halogen headlight

bulbs. When replacing a bulb, handle

it by its base, and protect the glass

from contact with your skin or hard

objects. If you touch the glass, clean

it with denatured alcohol and a clean

cloth.

Halogen headlight bulbs get very hot

when lit. Oil, perspiration, or a scratch

on the glass can cause the bulb to

overheat and shatter.

1. Open the hood.

Remove the electrical connector

from the bulb by pushing on the

tab and pulling the connector

down.

2. Remove the bulb by turning it

about one-quarter turn

counterclockwise.

3. Insert the new bulb into the hole,

and turn it one-quarter turn

clockwise to lock it in place.

4. Push the electrical connector onto

the new bulb.

5. Turn on the headlights to test the

new bulb.

BULB

CONNECTOR

CONTINUED

Lights

431

Maintenance

09/07/07 15:02:04 10 ACURA RDX MMC North America Owner's M 50 31STK630 enu

2010 RDX

1 2 ... 430 431 432 433 434 435 436 437 438 439 440 ... 513 514

Kommentare zu diesen Handbüchern

Keine Kommentare