Acura 2008 TL Bedienungsanleitung PDF herunterladen (Seite 292)

Let the engine run for several

minutes, then check the drain bolt

and oil filter for leaks.

Reinstall the engine oil fill cap.

Start the engine. The oil pressure

indicator should go out within 5

seconds. If it does not, turn off the

engine and check your work.

Install a new oil filter according to

the instructions that come with it.

Remove the oil filter, and let the

remaining oil drain. A special

wrench (available from your

dealer) is required.

Turn off the engine and let it sit

for several minutes, then check

the oil level on the dipstick. If

necessary, add more oil.

Make sure the oil filter gasket is

not stuck to the engine block. If it

is, remove it before installing a

new oil filter.

Make sure to clean off any dirt

and dust on the connecting

surface of a new oil filter.

Put a new washer on the drain bolt,

then reinstall the drain bolt.

Tighten the drain bolt to:

Refill the engine with the

recommended oil.

Engine oil change capacity

(including filter):

Changing the Oil and Filter

Maintenance

289

OIL FILTER

29 lbf·ft (39 N·m , 4.0 kgf·m)

4.5 US qt (4.3

)

Improper disposal of engine oil can be

harmf ul to the environment. If you

change your own oil, please dispose of

the used oil properly. Put it in a sealed

container, and take it to a recycling

center. Do not discard it in a trash bin

or dump it on the ground.

０７／０６／１２１７：３０：３１３１ＳＥＰ６４００２９４

2008 TL

Table Of Contents

Main Menu

1 2 ... 287 288 289 290 291 292 293 294 295 296 297 ... 375 376

Kommentare zu diesen Handbüchern

Keine Kommentare

Acura 2008 TL Bedienungsanleitung Seite 292

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Acura 2008 TL